Symptoms
Portrait images transfer while depth adjustments are absent on the second computer. This guide addresses the specific difference between what still works and what fails. It uses a controlled comparison instead of a general reset: Check whether the unmodified original and edit metadata are available on both Macs. The goal is to restore the documented behavior while retaining the original data and configuration.
- Primary symptom: Portrait images transfer while depth adjustments are absent on the second computer.
- Baseline measurement: Check whether the unmodified original and edit metadata are available on both Macs.
- Normal path to preserve: Both the original and the corrected copy can be opened and compared.
Why It Happens
A displayed thumbnail, sync tick or matching filename may refer to a different version. The safest comparison uses a separate destination plus a small file that can be opened and checked.
Three plausible explanations should be checked in sequence; none is proven merely because it is common on similar devices.
- Different exported format. Treat this as a testable explanation for the observed difference; compare against the stated baseline rather than assuming it is the cause.
- Adjustment sync lag. This may affect the specific step that fails while leaving the comparison case intact.
- Feature availability across versions. If the first two possibilities are excluded, use the deeper diagnostic described below to check this layer.
Before Making Changes
Do not flatten or replace the original library to test synchronization.
Names, timestamps, previews and cloud icons are not substitutes for opening the actual recovered file. Test on a copy before altering the archive.
Take a screenshot or short written note of the original values. If the test needs a file, export, print or recording, create a disposable sample or work on a duplicate; do not replace an irreplaceable original. Do not alter shared or managed equipment without appropriate permission.
Problem-Specific Diagnosis
The table separates observations, interpretations and next actions. Start at the top and stop as soon as the expected outcome is restored.
| Test | What it distinguishes | Next action |
|---|---|---|
| Check whether the unmodified original and edit metadata are available on both Macs. | Whether the failure is tied to the original condition or also affects the control. A difference supports investigating different exported format. | Confirm the same library and sync scope, then wait for synchronization on a stable connection. |
| Check the setting or route involved in: Confirm the same library and sync scope, then wait for synchronization on a stable connection. | If only the affected path improves, adjustment sync lag is worth inspecting next. | Restore previous settings if the expected result does not change. |
| Compare system app feature support, original versus exported image types and non-destructive adjustment metadata. | A second-layer difference can support investigating feature availability across versions without treating it as certain. | Use vendor-specific guidance or authorized service for the isolated layer. |
| An editable portrait retains the same depth adjustment on both supported devices. | A stable result after normal reconnection is more persuasive than a transient indicator. | Retain the working configuration and document the observed pass condition. |
A useful negative result is not wasted effort. If the first comparison does not isolate the fault, note exactly which variable stayed unchanged. This prevents moving from a narrow symptom to a factory reset without evidence.
Choose Your Fix: Beginner or Advanced
Beginner is a reversible first route; Advanced investigates different components when the baseline comparison and first correction do not explain the issue. You do not need to perform both paths if the first one fixes the problem.
Step-by-Step Troubleshooting
Choose the reversible Beginner route or the deeper Advanced route based on your comparison.
Capture a baseline for digital files & archives
Portrait images transfer while depth adjustments are absent on the second computer. Check whether the unmodified original and edit metadata are available on both Macs. Record the exact result and one comparison that behaves normally. Note the device, app or model involved; a simple before/after note is enough.
Preserve the working configuration
Do not flatten or replace the original library to test synchronization. Keep a copy of any file, job profile, schedule or setting that could be affected. Names, timestamps, previews and cloud icons are not substitutes for opening the actual recovered file. Test on a copy before altering the archive.
Apply the least disruptive correction
Confirm the same library and sync scope, then wait for synchronization on a stable connection. Do only this specific adjustment for the first trial. Do not erase data, reset the full device or rewrite unrelated settings to chase a local symptom.
Repeat the original practical test
An editable portrait retains the same depth adjustment on both supported devices. Reproduce the same comparison described in the first step. If the result is unchanged, undo the last reversible adjustment and proceed to the Advanced route rather than repeating resets.
Separate three plausible causes
Investigate different exported format, adjustment sync lag and feature availability across versions as independent hypotheses. Check whether the unmodified original and edit metadata are available on both Macs. The failure following one path is stronger evidence than a generic status icon.
Inspect the second technical layer
Compare system app feature support, original versus exported image types and non-destructive adjustment metadata. Record exact supported option names, event times and physical observations. Do not change hardware settings or permissions until a controlled comparison identifies the relevant layer.
Cross-check against a working control
Test the unaffected condition again without applying the beginner correction a second time. Ask whether the evidence points to adjustment sync lag rather than different exported format; use one known-good cable, file, profile, network or environment only where safe and available.
Escalate with evidence and a rollback plan
If this remains unresolved, record the two test outcomes, model and supported firmware/software versions, and the observed difference. Do not flatten or replace the original library to test synchronization. Share a redacted summary with authorized support rather than changing unrelated components.
Common Mistakes to Avoid
- Treating different exported format as a proven cause without comparing the failing condition.
- Repeating confirm the same library and sync scope, then wait for synchronization on a stable connection while ignoring evidence pointing to a separate technical layer.
- Changing several independent controls together and then losing track of which change mattered.
- Skipping this precaution: Do not flatten or replace the original library to test synchronization
How to Verify the Fix
An editable portrait retains the same depth adjustment on both supported devices.
Perform the same practical check again after a normal restart, reconnection or next scheduled cycle, as appropriate for this device. Confirm that the original unaffected function still works and that the correction did not introduce a new problem.
If the result cannot be reproduced reliably, retain the notes and classify the problem as intermittent rather than declaring a permanent fix.
If the Problem Continues
Move to the deeper test only after the first correction has been measured: Compare system app feature support, original versus exported image types and non-destructive adjustment metadata.
Provide authorized support with the exact symptom, model identifier, relevant software or firmware information, timestamps, first comparison and actual final result. Do not upload passwords, QR codes, account tokens, student records, private recordings or personal location details.
A limitation documented for the device or service may require a supported alternate workflow; a damaged component, hazardous appliance or account-policy restriction needs professional or administrator assistance rather than an improvised bypass.
Prevent Recurrence
Save a note of the working configuration and keep original source files, profiles and service permissions available for recovery. Repeat the same short comparison after major changes to firmware, installed applications, cable routing, profiles, schedules or storage.
For this problem the most useful periodic check is the actual outcome: An editable portrait retains the same depth adjustment on both supported devices.
Frequently Asked Questions
Why does this happen if another related function still works?
Because different exported format, adjustment sync lag and feature availability across versions affect different stages. Check whether the unmodified original and edit metadata are available on both Macs. That comparison is more useful than a broad “connected” or “ready” indicator.
What is the safest first change?
Confirm the same library and sync scope, then wait for synchronization on a stable connection. Do not flatten or replace the original library to test synchronization. This first action is limited in scope; it is not permission to remove protections, overwrite original files or reset every setting.
How do I know I fixed the actual problem?
An editable portrait retains the same depth adjustment on both supported devices. Reproduce the original failing situation and repeat the check. If the result returns only briefly, keep the evidence and investigate the deeper layer: Compare system app feature support, original versus exported image types and non-destructive adjustment metadata.
Solution Checklist
Use the checklist to distinguish a tested correction from a change that merely hid the symptom.