Symptoms
Epson EcoTank Photo Prints Have Bands Only on Glossy Paper. This symptom affects a particular operation; a related feature may still behave normally.
To capture the distinction, begin with this observation: Print the same photograph on plain paper and glossy paper, keeping file and print size identical. Note whether the failure follows a specific file, account, input, session or device.
Why It Happens
Three different mechanisms can lead to a similar visible symptom. Use a comparison before deciding which applies:
- The selected queue or driver exposes a different set of printer capabilities.
- A paper type, feeder, orientation or content setting changes the processing path.
- The device and host disagree about queue state, network identity or consumable reporting.
Use the diagnostic comparisons below to distinguish these possibilities before choosing a correction.
Before Making Changes
Do not run excessive head cleaning because it consumes ink and waste capacity. Print jobs may contain private documents; use disposable test pages and save driver presets before changing them. Use a disposable test item if the operation can send notifications or alter shared data.
Write down each original setting so you can reverse the change; do not risk the sole remaining copy of a file or account record.
Problem-Specific Diagnosis
The useful question is which layer makes the same action behave differently. Use the same one-page control document in the device panel and an independent application to isolate software from hardware. These observations guide testing; they are not a diagnosis until verified.
| What you observe | What it suggests | Next comparison |
|---|---|---|
| One path succeeds and the original path fails | A device-panel test succeeding while computer output fails implicates driver or application. | Compare printer quality modes and compatible media profile; run a single supported printhead clean if nozzle check shows gaps. |
| The result changes when account, source or device changes | Flatbed working while feeder fails points to a scan source or ADF-specific issue. | Print the same photograph on plain paper and glossy paper, keeping file and print size identical. |
| Both the original and control fail consistently | The same failure on every client with a device self-test fault warrants hardware support. | Inspect media feed direction, head alignment and bidirectional printing; avoid repeated cleaning cycles. |
Step-by-Step Troubleshooting
Start with the Beginner tab for reversible checks. Choose Advanced only when the comparison points to a specific setting or integration.
Capture the symptom without changing data
Print the same photograph on plain paper and glossy paper, keeping file and print size identical. Note the device or app, affected item, time, and visible state. This baseline will let you tell a genuine fix from a temporary refresh.
Check the safest relevant setting
Select paper type that matches the actual glossy stock and run a nozzle check. Make only that one small change, then repeat the original action once before adjusting anything else.
Compare an independent path
Compare printer quality modes and compatible media profile; run a single supported printhead clean if nozzle check shows gaps. Keep other variables steady. If the alternate path works, focus on the layer that differs; if both fail, investigate shared dependencies.
Confirm the everyday workflow
A glossy test print shows even gradients without new horizontal streaks. Repeat the check from a fresh session if practical. Restore the original setting if this change did not improve the result.
Identify the failing boundary
Inspect media feed direction, head alignment and bidirectional printing; avoid repeated cleaning cycles. Record the result and the original configuration so it can be restored; do not infer a cause without a comparison.
Separate client, account and device layers
Use the same one-page control document in the device panel and an independent application to isolate software from hardware. Determine whether the mismatch follows the content, account, hardware path or application before choosing a targeted correction.
Apply one narrow correction
Based on the evidence, adjust only the affected rule, profile, input, route or supported feature setting. Select paper type that matches the actual glossy stock and run a nozzle check. If a change is unavailable for this model or account, stop rather than forcing it.
Prove the fix and document rollback
A glossy test print shows even gradients without new horizontal streaks. Test the original failing path and the control path. Reverse the last change if it introduces another fault; preserve screenshots of the working state.
Solution Checklist
Common Mistakes to Avoid
Do not install random driver bundles, repeatedly deep-clean printheads or erase device configuration without evidence. For this specific scenario: Do not run excessive head cleaning because it consumes ink and waste capacity. Changing more than one setting at once makes it harder to identify the actual cause.
How to Verify the Fix
A glossy test print shows even gradients without new horizontal streaks. Repeat the original action in a fresh session rather than assuming that one successful preview proves the repair. Confirm the control path still works.
- Reproduce the fault with the original input before making a change.
- Rerun the comparison: Compare printer quality modes and compatible media profile; run a single supported printhead clean if nozzle check shows gaps.
- Verify that the successful result persists after reopening the affected app or reconnecting the device.
- If other functionality regresses, restore the recorded previous settings.
If the Problem Continues
If the test still fails, preserve the baseline and the comparison results. Inspect media feed direction, head alignment and bidirectional printing; avoid repeated cleaning cycles. Share the exact device model, app version, relevant screenshots without private information, and the smallest reproduction with official product support or the account administrator. If the fault is hardware-related or safety-critical, use authorized service instead of bypassing protection.
Prevent Recurrence
Keep a small test document, retain official drivers and verify queue/scan defaults after router or OS changes. Document the final working setting and the test that demonstrated success. After an app, device, router or account change, check a small example again before relying on the workflow.
FAQ
Does this mean the entire device or service has failed?
Not necessarily. The selected queue or driver exposes a different set of printer capabilities. Compare a known-good path before assuming a widespread fault.
What should I test before resetting anything?
Print the same photograph on plain paper and glossy paper, keeping file and print size identical. Use the same one-page control document in the device panel and an independent application to isolate software from hardware. This is more informative than a full reset.
How can I tell whether the problem is solved?
A glossy test print shows even gradients without new horizontal streaks. Verify the result again after reconnecting or restarting the relevant app or device.
Disqus hosts the discussion. Comments load automatically as you approach this section and may use cookies.